Automatic single head corner labeling machine

TY-809  automatic single head corner labeling machine

one. Basic use

Specially used for labeling the corners of boxes, labeling the upper and side surfaces of the boxes to prevent disassembly. Mainly used for anti-tamper labeling of poker and electronic product packaging boxes.

two. Features

1. Specially used for labeling the corners of boxes, realizing corner labeling on the upper and side surfaces of the boxes to prevent disassembly;
2. High speed, the corner labeling speed of playing cards reaches 180 boxes / minute, which greatly improves production efficiency;
3. The labeling is firm and will not fall off. The upper flat part of the label is rolled by a roller to cover the label firmly, and the side flat part is pressed firmly by a brush;
4. High stability, equipped with a top pressing mechanism, high stability of box transportation, and good labeling and labeling effects;
5. Intelligent control, automatic photoelectric tracking, with no labeling for anything, automatic correction without labels and automatic label detection functions to prevent missed labeling and label waste;
6. High stability, the advanced electronic control system composed of Panasonic PLC + Panasonic touch screen + Panasonic needle electric eye + German Leuze label electric eye supports 7 × 24 hours operation of the equipment;
7. Application examples: Anti-tampering labeling of Nestlé boxes, anti-tampering labeling of playing card cartons, and anti-tampering labeling of network card boxes.

three. working principle

1. Core working principle: The sensor detects the passing of the product and transmits the signal back to the labeling control system. At the appropriate position, the control system controls the motor to send out the label and attach it to the position of the product to be labeled. The product flows through the labeling brush, and the label Being brushed over, the attaching action of a label is completed.
2. Operation process: Place the product (connected tothe assembly line ) - > Product transportation - > Product inspection - > Labeling (automatically completed by the equipment) - > Brush labeling - > Collect the labeled products (flow into the next section of the assembly line).

Four. Technical Parameters